An engine's thermal efficiency is a measure of how much of the heat energy generated by combustion is actually converted into useful work. A good rating for a road car is about 40% whereas 50% is a rating normally associated with the best Formula One engines. Most cars particularly older models are have 20%-30% efficiency ratings.
Nissan said Friday that an engine designed for road cars could achieve 50% thermal efficiency, but there's a catch: the engine would need to be running at a constant rpm, for example when used as a generator in an extended-range electric vehicle.
In a conventional car, an engine experiences a wide variety of rpm and loads, which prevents it from running in its most optimal state due to the rich air-fuel mix required at certain rpm levels. This isn't the case for an engine acting as a generator, which can constantly run at a level that allows a lean air-fuel mix.
But Nissan plans to further improve the efficiency of an engine running at a constant state by optimizing in-cylinder gas flow (the flow of the air-fuel mixture that is pulled into the cylinder) and ignition, and as a result enable the engine to reliably burn an even leaner air-fuel mix at a higher compression ratio. By also adding heat energy recovery systems, Nissan managed to achieve a 50% thermal efficiency, the automaker said, without providing further detail.
Such an engine could be used in one of Nissan's E-Power models. Nissan's E-Power models are essentially electric vehicles with batteries that are charged on the go via a combination of energy regeneration and a small engine serving purely as a generator. Electricity generated by the engine can also be sent directly to the vehicle's electric motor(s) during high-load situations.
Twitter and Instagram; @VverteAutoSevcs
Email; vverteautosevcs@gmail.com
Phone; 09137103730
<script async src="https://pagead2.googlesyndication.com/pagead/js/adsbygoogle.js?client=ca-pub-2583627563363777"
crossorigin="anonymous"></script>
Comments
Post a Comment