The main difference is in the placement of the camshaft.
OHV means Over Head Valve. Although almost all modern car engines have valves placed in the cylinder head The term OHV is used to describe a pushrod engine, with the camshaft placed in the cylinder block.
OHC stands for Over Head Cam, or the camshaft is installed in the cylinder head. SOHC means Single Overhead Cam, while DOHC means Double Overhead Cam.
Which one is better? It's always a heated argument. Muscle car fans will swear by an old-school pushrod, while younger car enthusiasts will say that nothing beats the twin-cam (DOHC). Each design has its pluses and minuses.
OHV or Pushrod engine
 |
| An OHV engine animated diagram |
In an OHV engine, the camshaft is placed inside the block and the valves are operated through lifters, pushrods and rocker arms. This mechanism is called a valvetrain. An OHV design has been successfully used for many years. Most early American cars had OHV engines and they are still used in trucks and sports cars with big engines.
The downside of an OHV design is that it requires many moving components to operate the valves. Each component adds weight. This results in higher valvetrain inertia, making it difficult to control the valve timing at higher RPMs.
 |
| OHV Engine Components |
A small OHV engine will not be very efficient. The OHV design is more suitable for larger V6 and V8 engines. OHVs are not found in modern compact cars.
Advantages of an OHV engine include a lower cost, higher low-end torque and more compact size.
OHV engines are also famous for their durability and longevity. It's not uncommon to see older trucks with an OHV V8 engine with over 300K miles still running strong.
Maintenance costs are low too. A typical OHV engine has a small timing chain that is not very difficult to replace.
Examples of;
1. Chrysler Hemi 5.7L OHV V8 engine
2. GM 6.2L LSA V8.
OHC or SOHC engine
 |
| SOHC engine animated diagram |
OHC simply means Over Head Cam, while SOHC means Single Over Head Cam or Single Cam.
In a SOHC engine the camshaft is installed in the cylinder head, and valves are operated either by the rocker arms or directly through the lifters (as in this animation).
The advantage of the OHC design is that valves are operated almost directly by the camshaft, which makes it easier to maintain precise timing at higher rpms. It's also possible to install three or four valves per cylinder.
 |
| SOHC engine components |
Honda successfully uses the SOHC design in its late V6 engines where four valves per cylinder are operated by a single camshaft.
The downside of an OHC engine is that it requires a timing belt or chain with a tensioner and other related components. A timing belt must also be replaced at regular intervals. The timing chain lasts longer, but it too might need to be replaced if stretched. Another downside is that it's more difficult to implement variable valve timing separately for exhaust and intake valves; something that can be easily done in a DOHC engine.
DOHC or Twin-Cam engine
 |
| DOHC engine animation |
DOHC means Double Over Head Cam. A DOHC engine design is often called Twin Cam or Dual Cam. The majority of modern cars have a DOHC engine. A typical DOHC engine has two camshafts and four valves per cylinder, like the one in this animation. One camshaft operates intake valves, while another camshaft controls exhaust valves on the opposite side.
In a DOHC engine, camshafts can be installed farther apart from each other.
 |
| DOHC engine components |
This allows the intake valves to be at a larger angle from the exhaust valves, which results in a more direct air flow through the engine. In other words, a DOHC engine can "breathe" better, which means it can produce more horsepower out of a smaller engine volume, which is very important for small economy engines.
 |
| DOHC engine diagram |
Technologies like Variable Valve Timing and Variable Valve Lift can be easily implemented in a DOHC engine on both camshafts further improving efficiency.
Downsides of a DOHC engine include a larger size and more complex design with a timing belt or chain and related components. A timing belt needs to be replaced at recommended intervals, adding to maintenance costs. Replacing a timing chain is only necessary if it's stretched, or there is another related problem, but it could be expensive.
In conclusion, the DOHC engine design is the most fuel-efficient and is more widely used in today's economy cars (probably your car as well), but an old-school OHV engine will last longer in similar conditions and is cheaper to maintain.
Twitter and Instagram; @VverteAutoSevcs
Email; vverteautosevcs@gmail.com
Phone; 09137103730
<script async src="https://pagead2.googlesyndication.com/pagead/js/adsbygoogle.js?client=ca-pub-2583627563363777"
crossorigin="anonymous"></script>
Comments
Post a Comment