Skip to main content

Driving Tips I; Driving With Care Everyday

Driving your car every day will reward you with fewer repairs and fewer costs. 

Mornings
Do not race/raise/fire or rev your car’s engine during start-up. This is a quick way to add years of wear to your engine, especially if it’s cold outside. Where you dey hurry go?
Accelerate slowly when you begin your drive. The most wear to the engine and drive train occurs in the first 10 to 20 minutes of operation. No be fast and furious.
Warming the engine by letting it idle in the compound is not a smart idea. The engine doesn’t operate at its peak temperature, resulting in incomplete fuel combustion, soot deposits on cylinder walls, oil contamination, and ultimately damaged components. Just drive it slowly. No more, "make I warm am first" in todays fuel injected engines.

Noon
Put less strain on your engine and automatic transmission by shifting to neutral and stepping on your brakes at red lights. Otherwise, the engine is still working to push the car even while it’s stopped. 
Personally, if it's more than 30secs, I shift to neutral and pull the parking brakes.
Do not use the park option as it is less convenient and requires a longer shift pattern.
Avoid driving at high speeds and accelerating quickly, especially when it’s very hot or very cold outside. Such driving behaviour will result in more frequent repairs. No dey fire am.
Extend the life of your tires with careful driving. Observe posted speed limits. Avoid fast starts, stops, and turns. Avoid potholes and objects on the road. Don’t run over curbs or hit the tire against the curb when parking. Don't drive like Mr. Lawrence Anini's relative.
When turning your steering wheel, don’t hold it in an extreme right or left position for more than a few seconds. Doing so can damage the power-steering pump. Release am small.
Consolidate your short driving trips. Most of the wear and tear takes place in the first few minutes of driving. Doing several errands at once, during low traffic hours if possible, will keep your engine happier longer. Reduce your waka waka. 

Evenings
Do not rev your engines and shut them off immediately. Your cylinder walls will be dry on your next start-up. Guess what that leads to? Yes, more wear and tear. Park am quietly.

Cheers!

Feel free to read our posts
Suggestions or questions?
carnaira9@gmail.com
IG/FB; @carnaira
Call/chat; 2347064978705
WhatsApp group; https://chat.whatsapp.com/DDMtvmSsfVoKfcfJ9RNuAo


Comments

Popular posts from this blog

You can reach CarNaira!

Hello! Thanks and Welcome Again. NG CarNaira seeks to be an interactive platform creative to serve as a community where experiences are shared. It welcomes open and free expression and welcomes all. Feel free to read our posts Suggestions or questions? carnaira9@gmail.com Call/chat; 2347064978705 WhatsApp group; https://chat.whatsapp.com/DDMtvmSsfVoKfcfJ9RNuAo Thank you.

Nigeria to Become Africa’s Electric Vehicle Hub Through Landmark Deal with South Korea

In a move that signals a new industrial era, the Federal Government of Nigeria has entered into a strategic partnership with South Korea’s Asia Economic Development Committee (AEDC). Signed on January 30, 2026, the Memorandum of Understanding (MoU) between the Federal Government and South Korea’s Asia Economic Development Committee (AEDC) marks a turning point for clean energy in Africa.  The deal, signed by the Minister of State for Industry, Trade, and Investment, Senator John Owan-Enoh, and AEDC Chairman Yoon Suk-hun, aims to transform Nigeria into the continent’s leader for clean mobility by establishing the first full-scale Electric Vehicle (EV) manufacturing plant in Africa.  Breaking: Nigeria to Become Africa’s Electric Vehicle Hub Through Landmark Deal with South Korea The Blueprint 1. The Numbers: Jobs, Vehicles, and Value  This collaboration transcends mere assembly; it is a commitment to full-scale, high-capacity manufacturing. The projections for the new facil...

Understanding Your Exhaust: A/F Sensors vs. O2 Sensors

Do you know that you popular oxygen sensor is of two types? They are the  "O2 Sensor" and "Air/Fuel Ratio Sensor" . While they look almost identical, they are definitely not the same.  Installing the wrong one can lead to "check engine" lights, poor fuel economy, or even damage to your vehicle. Here is why these two sensors are the "brain" of your exhaust system.  1. The Standard O2 Sensor: The "Light Switch" The traditional Oxygen (O2) sensor, often called a narrowband sensor, is the old-school industry standard. It acts like a simple on/off switch. It tells the engine computer (ECU) if the exhaust is too rich (too much fuel) or too lean (too much air) (like 15:1 or 0:1) It however cannot tell the computer how much the mixture is off. It just constantly bounces back and forth between rich and lean signals. In other words, it's either a 1 or 0, no in-betweens.  Location: Usually found downstream (after the catalytic converter) to mo...